The ultimate micromotor kit for most every job. Includes both rotary and hammer handpieces. System includes a slim, contoured-grip handpiece with a 3/32" (2.35mm) collet that is easy to install and change, hammer handpiece, three anvil points with threaded shanks, an anvil point adapter for unthreaded-shank accessories (2.35mm), a graver holder attachment that turns the handpiece into a precision power graver, two pins for tightening anvil points, an open-end wrench, an anvil point holder used for shaping your points, a spare pair of motor brushes, a handpiece tray, safety glasses, variable speed foot control, spare fuse and collet changing wrenches.
- The rotary handpiece has variable speed control (0–38,000rpm) with forward and reverse actio which is controlled either manually or by a foot control.
- 110/220V dual switch; safety protection fuse and overload light.
- The hammer handpiece features adjustable speed control from 0–5,000 strokes/minute. Can be adjusted with the handpiece on or off.
